Microstructural Characterization of Carburized Steels

Carburizing has been a popular method for obtaining a unique balance of properties in steels for many years. Steels with low carbon contents are characterized by good toughness and good ductility, but low strength and low wear resistance. By locally increasing the carbon content at the surface, followed by heat treatment to produce a very high hardness in this layer while maintaining a lower hardness in the core, the “best of both worlds” can be obtained a hard, wear-resistant surface with good fatigue strength and a tough, ductile core to inhibit the growth of any cracks that might form at the surface. Such a steel will be tougher than a through-hardened medium carbon content steel with the same surface hardness.

DOWNLOAD THE ARTICLE HERE

resourcesThe articles and presentations that can be down-loaded from this web site are based upon work done by GFV while employed at Bethlehem Steel (1967-1983), Carpenter Technology (1983-1996), Buehler Ltd. (1996-2009) and Struers (2009-Present) and from the authors consulting work for companies such as, Latrobe Steel, Scot Forge, etc., and from his litigation work. GFV's bylined articles appearing in various issues of the ASM Handbook series have been listed here courtesy of ASM International, Materials Park, Ohio.

Log in to your account or