Lectures List

1. "Analysis of Ductile and Brittle Failures" - ASM Applied Failure Analysis Symposium, July 9, 1974 and April 12, 1975.

2. "Conducting the Failure Examination" - Syracuse NY ASM Chapter Product Liability Seminar, April 13, 1976.

3. "Macroscopic Examination Procedures for Failure Analysis" - IMS/ASM Symposium "Metallography and Failure Analysis," Houston, July 17, 1977.

4. "Quantitative Metallography," - Saginaw Valley (Flint, MI) ASM Chapter Spring Lecture Series, April 4, 1978.

5. "Identification and Measurement of Inclusions" - Central Ohio Metallographic Society and Columbus (OH) ASM Chapter, September 27, 1978.

6. "A Metallographic Study of Factors Influencing the Toughness of Cermet (70% Alumina - 30% TiC) Inserts" - 1979 International Conference on Productivity Improvements Through New Tools and Applications, Society of Carbide and Tool Engineers, Chicago, June 12, 1979.

7. "Inclusion Measurement" - IMS/ASM Symposium "Metallography as a Quality Control Tool," Tamiment in the Poconos, July 2, 1979.

8. "Diagnosing Failures of Steel Components," Seminar: Failure Analysis of Structural Metals and Components, Philadelphia Chapter, ASM, Fort Washington, PA, May 6, 1980.

9. "Etching Techniques for Image Analysis" - 13th IMS Technical Meeting, Brighton, UK, August 21, 1980.

10. "Automating the JK Inclusion Analysis" - 14th IMS Technical Meeting, San Francisco, July 21, 1981.

11. "Microstructural Consequences in Steel Heat Treating" - New Jersey ASM Chapter, February 22, 1982.

12. "Microstructure of Materials - A Metallurgist's Artistry" - Lafayette College Student ASM/AIME Chapter, Easton, PA, March 9, 1982.

13. "Locomotive Axle Failures Due to Overheated Friction Bearings" - AAR WABL Committee, December 1, 1981; and, AISI Wheel and Axle Committee, March 24, 1982.

14. "Failure Analysis" - Pennsylvania State University Student ASM Chapter, State College, PA, April 14, 1982.

15. "Failure Analysis at Bethlehem" - HRL Research Dept. Seminar Series, Bethlehem, PA, June 11, 1982.

16. "Automating the JK Inclusion Analysis" - ASM Metals Congress, St. Louis, October 28, 1982.

17. "Inclusions in Ca-Treated Steels" - ASM Metals Congress, Phila., October 5, 1983.

18. "Quantitative Metallography" - Carpenter Technology Corp. R&D Seminar, Reading, PA, May 17, 1984.19. "Phase Identification by Selective Etching" - LECO Symposium on Metallographic Preparation Techniques and Interpretation of Microstructure, Innisbrook, FL, May 24, 1984.

20. "Observing Microstructures" - York (PA) ASM Chapter Educational Short Course, May 2, 1985.

21. "Examining Microstructures" - Hudson Valley ASM Chapter (Tarrytown, NY), October 1, 1985.

22. "Automated Sample Preparation for Image Analysis" - Struers Seminar on "Application Methods for Automatic Microsample Preparation in Quality Control and Research," Hartford, April 9, 1986.

23. "Techniques for Automatic Image Analysis of Microstructures" - National Bureau of Standards Metallurgy Division Seminar, Gathersburg, MD, June 3, 1986.

24. "The Use of Light Microscopy in Failure Analysis" - IMS/ASM Symposium "Microscopy and Fractography in Failure Analysis," Boston, August 3, 1986.

25. "Measurement of Extremely Low Inclusion Content Steels by Image Analysis" - ASTM International Symposium on Effect of Steel Manufacturing Processes on the Quality of Bearing Steels, Phoenix, November 5, 1986.

26. "Results of an ASTM E-4 Round-Robin on the Precision and Bias of Measurements of Microindentation Hardness Impressions" - ASTM Symposium on Factors that Affect the Precision of Mechanical Tests, Bal Harbour, FL, November 12, 1987.

27. "Colloidal Silica - A User's Experience" - LECO Symposium on Metallographic Preparation Techniques, Benton Harbor, MI, September 29, 1987.

28. "Quantitative Metallography" - Materials Science Seminar, Lehigh University, Bethlehem, PA, March 8, 1988.

29. "Operator Errors in the Measurement of Microindentation Hardness," - ASTM Symposium on Accreditation Practices: Inspection and Tests, Baltimore, MD, May 18, 1988.

30. "Imaging by Light Optical Microscopy" - TMS/ASM MSD Symposium "Imaging of Materials," World Materials Congress, ASM Intl., Chicago, September 26, 1988.

31. "Characterization of Inclusions in a Laboratory Heat of AISI 303 Stainless Steel" - ASM Intl. Symposium "Inclusions and Their Influence on Material Behavior," World Materials Congress, Chicago, September 29, 1988.

32. "Imaging of Microstructures," Rhode Island ASM International Chapter, Seekonk, MA, April 5, 1989.

33. "Light Optics in Failure Analysis," Liberty Bell (Phila) Chapter, ASM International,1989 Seminar on Metallurgical Failure Analysis, Horsham, PA, May 2, 1989.

34. "Computer Assisted Microscopy of Specialty Steels," 22nd IMS Convention, Charlotte, NC, July 24, 1989.

35. "Image Analysis at Carpenter," Carpenter Technology Corp., R&D Seminar, Reading, PA, September 14, 1989.

36. "Evaluating Clustering of Second-Phase Particles," MiCon 90, Symposium on Advances in Video Technology: Materials Science Applications, San Francisco, CA, May 25, 1990.

37. "Comparisons of Contrast Mechanisms for Imaging Microstructures for Light and Scanning Electron Microscopy," Invited Lecture, 23rd Annual IMS Technical Meeting, Cincinnati, OH July 25, 1990.38. "Microstructural Imaging - Light and Electron Beam," Philadelphia (Liberty Bell) Chapter of ASM International, September 20, 1990.

39. "Comparisons of Contrast Mechanisms for Imaging Microstructures for Light and Scanning Electron Microscopy," UTC Pratt & Whitney Symposium, "Metallography - The Neglected Process," East Hartford, CT, October 17, 1990.

40. "Contrast Modes - LOM vs SEM," Carpenter Technology R & D Seminar, 24 January 1991.

41. "Image Analysis of Specialty Steels," Educational Lecture Seminar, Pittsburgh Golden Triangle Chapter of ASM International, Harley Hotel, Pittsburgh, 19 March 1991.

42. "A History of ASTM Committee E-4," Symposium on Metallography: 75 Years Later, ASTM E-4, 8 May 1991, Atlantic City, NJ.

43. "Examination of Some Grain Size Measurement Problems," Symposium on Metallography: 75 Years Later, ASTM E-4, 9 May 1991, Atlantic City, NJ.

44. "Materials Characterization and Analysis," The Grosvenor Conference, Drexel University, Philadelphia, June 14, 1991.

45. "Microstructural Characterization of Custom Age 625 PLUS Alloy," 1992 TMS Annual Meeting, San Diego, CA, Wednesday, 4 March 1992 (presented for me by D.A. DeAntonio).

46. "Getting the Best Light Micrographs," Minnesota ASM Chapter and Optical Microscopy Society, St. Louis Park, MN, 25 March 1992.

47. "Phase Identification by Light Microscopy," ASM Milwaukee Chapter, Milwaukee, WI, 14 April 1992.

48. "Quantitative Metallography and Image Analysis," Westinghouse Science and Technology Center, Pittsburgh, 19 May 1992.

49. "Practical Aspects of Quantitative Metallography and Image Analysis," Alcoa Technical Center, New Kensington, PA, 9 June 1992.

50. "The Practical Aspects of Image Analysis," Instrumentation and Analysis Society, Monroeville, PA, 9 June 1992.

51. "Application of Quantitative Microscopy to Specialty Metals," 50th EMSA Anniversary Meeting, Boston, MA, 16-20 August 1992.

52. "Automatic Preparation of Iron and Nickel Based Specialty Metals," Struers Inc. Automation Workshop, 29 September 1992.

53. "Grain Size Measurements," ASM Materials Week, Chicago, IL, 2 November 1992.

54. "Metallography 1993," Bradley Stoughton Award Meeting, Lehigh Valley Chapter of ASM Intl., Moselem Springs, 14 January 1993.

55. "Metallography 1993," West Virginia Chapter of ASM International, Huntington, WV, 20 January 1993.

56. "Metallographic Specimen Preparation and Light Microscopy, a 25 Year Perspective," Struers A/S, Copenhagen, Denmark, 19 April 1993.57. "Quantitative Metallography and Image Analysis," The Norwegian Institute of Technology, Trondheim, Norway, 22 April 1993.

58. "Quantitative Metallography and Image Analysis," Swedish Iron and Steel Institute, Stockholm, Sweden, 27 April 1993.

59. "Light and Electron Microscopy 1993," Georgia Institute of Technology, School of Materials Engineering, 4 May 1993.

60. "Precision and Reproducibility of Quantitative Measurements," International Conference on Quantitative Microscopy and Image Analysis, Charleston, South Carolina, Tuesday, 20 July 1993.

61. "Light Microscopy 1993," Carolinas Southern Piedmont Chapter, Charlotte, North Carolina, Monday, 13 September 1993.

62. "Metallography 1993," Broken Hill Proprietary Central Research Laboratories, Melbourne, Victoria, Australia, 17 September 1993.

63. "Statistical Aspects of Microstructural Measurements," Microscopy Congress - Materials & Techniques, Institute of Metals and Materials Australasia, Sydney, Australia, 21 September 1993.

64. "Metallography 1993," Microscopy Congress - Materials & Techniques, Institute of Metals and Materials Australasia, Sydney, Australia, 22 September 1993.

65. "Applications of Modern Metallographic Techniques," Concurrent Technologies Corp., Johnstown, PA, 19 October 1993.

66. "Color Microscopy of Metals," Reading Museum, Reading, PA, 20 February 1994.

67. "Color Microscopy of Metals," Philadelphia Society for Microscopy, University of Pennsylvania, LRSM, 8 March 1994.

68. "A Layman's View of Thermal Spray Coatings," Struers Workshop on Thermal Spray Coatings, Westlake, OH, 23 March 1994.

69. "Metallography 1994," CANMET, Ottawa, Canada, May 16, 1994.

70. "ASTM Standards for Quantitative Metallography," EUROMAT 94, Balatonszéplak, Lake Balaton, Hungary, May 31, 1994.

71. "Application of Automatic Image Analysis in Industry," University of Miskolc, Miskolc, Hungary, 2 June 1994.

72. "Light Microscopy - Still the Most Useful Tool," University of Miskolc, Miskolc, Hungary, 3 June 1994.

73. "A Quarter Century of Progress in Light Microscopy and Scanning Electron Microscopy," Katholieke Universiteit Leuven (Belgium), 3 October 1994.

74. "ASTM Standards for Inclusion Ratings," Eastern Section of the Iron and Steel Society, King of Prussia, PA, 21 October 1994.

75. "Metallography of Wrought High Temperature Alloys," 124th TMS Annual Meeting, Las Vegas, NV, 13 February 1995.

76. "Quantitative Metallography and Image Analysis: An Overview," Lawrence Livermore National Laboratory, Livermore, CA, 13 March 1995.77. "Metallography of Stainless Steel and High Temperature Alloy Fasteners," Struers Workshop: "Fastener Characterization by Mechanical and Metallographic Methods," Brea, CA, 15 March 1995.

78. "Quantitative Metallography and Image Analysis," Clemex Technologies Seminar, Metz, France, 3 May 1995.

79. "Thermal Exposure Assessment by Quantitative Microscopy and Selective Etching," International Metallography Conference, MC 95, Colmar, France, 12 May 1995.

80. "Progress in Characterizing Materials Using Image Analysis," Symposium: Developments in Materials Characterization Technologies," 28th IMS Annual Meeting, Albuquerque, NM, 23 July 1995.

81. "Precision and Reproducibility of Inclusion Measurements Using ASTM E 1245," Symposium: Accuracy and Precision of Computerized Image Analysis, Institute of Materials Science, University of Connecticut, 24 August 1995.

82. "Use of Selective Etching and Quantitative Microscopy in the Study of the Three Mile Island Lower Head," University of Miskolc, Miskolc, Hungary, 8 September 1995.

83. "Metallography of Stainless Steel and Nickel-Base Alloy Fasteners," Struers Symposium: Quality in the Fastener Industry, It's History and Dependence on Mechanical and Metallographic Methods, Westlake, Ohio, 2 October 1995.

84. "Examination of Microstructure by Light Microscopy," Universidad de Oviedo, Oviedo, Spain, 5 October 1995.

85. "The Study of Microstructure by Light Microscopy," TMS Tutorial Luncheon Lecture, TMS Annual Meeting, 5 February 1996, Anaheim, CA.

86. "Selected Topics of Interest to Ferrous Metallographers," BHP Metallography Users Group, BHP Central Research Laboratory, Melbourne, Australia, 28 May 1996 (4 hours).

87. "Assessing the Thermal Exposure to the Three Mile Island Unit 2 Reactor Lower Head by Metallographic Methods," Second Intl. Seminar and Exhibition on Materialography, Inst. of Metals and Materials Australasia, 30 May 1996, Sydney, Australia.

88. "Assessing the Thermal Exposure to the Three Mile Island Unit 2 Reactor Lower Head by Metallographic Methods," University of Queensland, Brisbane, Australia, 3 June 1996.

89. "ASTM Metallography Standards for Quality Control," Symposium on Advances in Specimen Preparation Techniques for Materials Analysis, 29th IMS Convention, Pittsburgh, 21 July 1996.

90. "Basic Phase Transformation Microstructures," Symposium on Microstructural Development, Phase Equilibria, and Properties, 29th IMS Convention, Pittsburgh, 22 July 1996.

91. “The SEM as a Metallographic Tool,” MICROMAT „96, 5th Brazilian Conference on Microscopy of Materials, Rio de Janeiro, 14 October 1996.

92. “Phase Identification by Selective Etching,” 5th Brazilian Conference on Microscopy of Materials, Rio de Janeiro, 14 October 1996.

93. “Inclusion Rating: Past, Present and Future,” ASTM Intl. Symposium on Bearing Steels, New Orleans, LA, November 20, 1996.

94. “ASTM Standards for Quantitative Metallography,” Microscopy Society of Southern Africa, Durban, 4 December 1996.95. “Assessing the Thermal Exposure to the Three Mile Island Unit 2 Reactor Lower Head by Metallographic Methods," Chicago ASM and TMS Chapters Monthly Meeting, 18 February 1997.

97. “Measuring Second-Phases by Image Analysis,” Instytut Odlewnictwa, Kraków, Poland, 14 April 1997.

98. “ASTM E 1245 for Inclusion Measurement,” Q-MAT?97, International Conference on the Quantitative Description of Materials Microstructure, Warsaw, Poland, 18 April 1997.

99. “Measuring Inclusion Content by ASTM E 1245,” Fifth Intl. Conference on Clean Steel, Balatonfüred, Hungary, 3 June 1997.

100. “Use of the SEM in Failure Analysis,” 16th Meeting of the Brazilian Society for Electron Microscopy, 1-5 September 1997, Caxambu, Brazil.

101. “Assessing the Thermal Exposure to the Three Mile Island Unit 2 Reactor Lower Head by Metallographic Methods,” Max-Planck-Institute, Stuttgart, Germany, 9 September 1997.

102. “Measuring Second Phases by Image Analysis,” DGM Annual Meeting, Karlsruhe, Germany, 10-12 September 1997.

103. “Metallography: Technology & New Product Trends,” Rochester Chapter ASMI, Rochester, NY, 13 October 1997.

104. “Metallography and Image Analysis,” Syracuse ASMI Chapter, Syracuse, NY, 14 October 1997.

105. “LOM Characterization of Materials and Advances in Metallography,” Illinois Institute of Technology, Mechanical, Materials and Aerospace Engineering Department, Chicago, Illinois, 29 October 1997.

106. “Three Mile Island Nuclear Reactor Failure,” Indianapolis Chapter of ASM International, Indianapolis, Indiana, 15 December 1997.

107. “Metallographic Assessment of the Thermal Exposure to the Three Mile Island Unit 2 Reactor Lower Head,” ASM Ontario Chapter, Toronto, Canada, February 2, 1998.

108. “Metallographic Assessment of the Thermal Exposure to the Three Mile Island Unit 2 Reactor Lower Head,” ASM Montréal Chapter, Montreal, Quebec, Canada, February 3, 1998.

109. “Metallographic Assessment of the Thermal Exposure to the Three Mile Island Unit 2 Reactor Lower Head,” ASM Ottawa Valley Chapter, Ottawa, Ontario, Canada, February 4, 1998.

110. “Automation in the Metallographic Laboratory,” Instrumentation & Analysis Society, Pittsburgh, PA, February 26, 1998.

111. “ ASTM Standards for Metallography,” Micro-Tek „98, Queretaro, Mexico, March 23, 1998.

112. “ ASTM Standards for Metallography,” Micro-Tek „98, Mexico City, Mexico, March 25, 1998.

113. “El Uso del Ataque Metalografico y la Metalurgia Cuantitativa en al Analisis del Reactor Nuclear de la Unidad 2 de la Isla de las Tres Millas,” Universidad Nacional Autonoma de Mexico, Mexico City, Mexico,March 25, 1998.

114. “ ASTM Standards for Metallography,” Micro-Tek „98, Monterrey, Mexico, March 27, 1998.

115. “Light Optical Microscopy” Foundry Research Institute, Krakow, Poland, April 20, 1998.116. “Contemporary Concepts in Specimen Preparation” 10th Symposium on Metallography, Metallography „98, Stara Lesna, Slovakia, April 22, 1998.

117. “Metallographic Assessment of the Thermal Exposure to the Three Mile Island Unit 2 Reactor Lower Head”, Rockford, IL Chapter of ASMI, April 28, 1998.

118. “Light Optical Microscopy”, Carolinas Southern Piedmont Chapter of ASMI, Matthews, NC, May 18, 1998.

119. “Metallographic Preparation Techniques for Heat Treaters”, Southwest New York Chapter, ASMI, Olean, NY, May 21, 1998.

120. “Metallography of Superalloys”, Materials „98, Institute Materials Engineering Australasia, University of Woolongong, Australia, July 8, 1998.

121. Optical Microscopy (1 day course), Inst. Materials Eng. Australasia, Melbourne, Australia, July 9, 1998.

122. “New Metallographic Practices for Studying Heat Treated Metals and Alloys”, 1st International Conference on Automotive Heat Treating (ASMI), Puerto Vallarta, Mexico, July 15, 1998.

123. “Light Optical Microscopy” (2h lecture in short course, “Advanced Optical Microscopy”), International Metallographic Society, 31st Annual Convention, Ottawa, Canada (given twice), July 26, 1998.

124. “Contemporary Concepts in Specimen Preparation” , IMS Meeting, 31st Annual Convention, Ottawa, Canada, July 29, 1998.

125. “Light Optical Metallography”, Warsaw Polytechnic University, Warsaw, Poland, September 9, 1998.

126. “Specimen Preparation for Quantitative Metallography”, Silesian University of Technology, Katowice, Poland, September 10, 1998.

127. “New Materials for Metallographic Specimen Preparation” , Internationale Metallographie - Tagung (DGM), Montanuniversitat Leoben, Leoben, Austria, September 16, 1998.

128. “Automating Microindentation Hardness Testing” , HARDMEKO „98 (Chinese Society for Measurement), Beijing, China, September 22, 1998.

129. “Metallography for Heat Treaters”, Chinese Society for Heat Treatment (1 day seminar), Beijing, China,

September 23, 1998.

130. “Revealing the Microstructure of Heat Treated Specimens, 17th National Conference on Heat Treatment, Brno, Czech Republic, November 24, 1998.

131. “ASTM Standards for Metallography,” Technical University of Prague, Praha, Czech Republic, November 26, 1998.

132. “Metallographic Assessment of the Thermal Exposure to the Three Mile Island Unit 2 Reactor Lower Head, Cleveland ASM Chapter, Cleveland, Ohio, December 7, 1998.

133. “Metallography at the Millennium,” Carolinas Central Chapter, Raleigh, North Carolina, January 28, 1999.

134. “Light Microscopy and the Microstructure of Metals and Materials,” Politechnika Warszawska (Warsaw University of Technology), Warsaw, Poland, February 23, 1999

135. “Light Microscopy and the Microstructure of Metals and Materials,” Politechnika Slaska (Silesian University of Technology), Katowice, Poland, Febraury 24, 1999.136. “Automating Microindentation Hardness Testing,” II National Conference on Industrial Laboratory of Metallography - Equipment, Methods, Achievement and Problems,” 21-23 April, 1999, Ustron, Poland (G.M. Lucas, co-author; presented by D. Cebula, Testing, Katowice, Poland).

137. “Metallography for the Millennium,” Milwaukee ASM Chapter, Milwaukee, Wisconsin, May 11, 1999.

138. “Metallographic Preparation of Titanium and Its Alloys,” 9th World Conference on Titanium, St. Petersburg, Russia, June 9, 1999.

139. “Principles of Stereology and Quantitative Metallography,” Seminar, Image Analysis Theory and Advanced Applications,” IMAGING TECH „99, Arlington Heights, Illinois, August 16, 1999.

140. “Reflected Light Microscopy,” IMAGING TECH „99, Arlington Heights, Illinois, August 17, 1999.

141. “Nodularity Analysis of Ductile Cast Irons,” IMAGING TECH „99, Arlington Heights, Illinois, August 19, 1999.

142. “Metallographic Techniques for Tool Steels,” 5th International Tooling Conference, Tool Steels in the Next Century, Montanuniversität Leoben, Leoben, Austria, September 30, 1999.

143. “ASTM Committee E-4 and Grain Size Measurements,” 32nd Annual IMS Convention, Cincinnati, Ohio, November 2, 1999.

144. “Nodularity and Nodule Count Measurements,” 32nd Annual IMS Convention, Cincinnati, Ohio, November 3,

1999.

145. “Metallography of High Strength Steels,” 11th Rio Grande Regional Symposium on Advanced Materials, Albuquerque, New Mexico, October 11, 1999.

146. “Metallography for the Millennium”, Canton-Massillon ASM Chapter, Canton, Ohio, December, 14, 1999.

147. “Three Mile Island Failure Analysis,” Kansas City ASM Chapter, Wednesday, 15 March 2000, Kansas City, MO.

148. “Structure-Property Fractographic Relationships for 356 Aluminum,” Metal 2000, 9th

International Metallurgical Conference, Ostrava, Czech Republic, May 17, 2000.

149. “Metallographic Practices for Surface-Treated Steels,” 3rd International Conference on Heat Treatment with Atmospheres, Gothenberg, Sweden, Wednesday, June 7, 2000.

150. “The Use of Light Microscopy in Failure Analysis,” Failues 2000, Umhlanga Rocks, South Africa, Tuesday, July 25, 2000.

151. “Metallography of Precious Metals, Mintek, Randburg, South Africa, Wednesday, August 2, 2000.

152. “Metallography and Microstructures,” University of Pretoria, Pretoria, South Africa, Wednesday, August 2, 2000.

153. “New Rigid Grinding Discs for Metallography,” EURO-MET 2000, DGM Meeting, Saarbrücken, Germany, September 13-15, 2000

154. “The Microstructure of Ferrous Alloys,” ASM Materials Solutions 2000, Industrial Ferrous Metallurgy for the Materials Science Engineer, St. Louis, MO, October 10, 2000.

155. “Quantitative Metallography and Fractography of 356 Aluminum,” 33rd IMS Meeting, St. Louis, MO, October 9, 2000.156. “New Rigid Grinding Disks for Metallography,” 33rd IMS Meeting, St. Louis, MO, October 11, 2000.

157. “Metallographic Techniques for Duplex Stainless Steels,” 6th World Conference on Duplex Stainless Steels, Venice, Italy, October 17-20, 2000.

158. “Image Analysis for Today?s Metallography Laboratory,” Worcester, Mass. and Providence, RI, chapters of ASM International, November 15, 2000.

159. “Microstructure of Ferrous and Aluminum Alloys,” MTE Seminar, Worcester Polytechnic Institute, Worcester, MA, November 16, 2000.

160. “Metallographic Procedures for Edge Retention to Study Surface Hardening Processes,” 18th

National Conference on Heat Treatment, Brno, Czech Republic, November 28-30, 2000.

161. “Metallographic Study of the Three Mile Island Unit 2 Reactor Lower Head,” Akron ASM Chapter, 17 January 2001.

162. “Metallographic Study of the Three Mile Island Unit 2 Reactor Lower Head,” Los Angeles ASM Chapter, February 20, 2001.

163. “Microstructure of Metals,” Don Bosco College , Febraury 23, 2001.

164. “Advances in Metallography,” Santa Clara ASM Chapter, February 21, 2001.

165. “Microstructure of Metals,” California Polytechnic University, San Louis Obispo, February 22, 2001.

166. “Microstructure of Sintered Carbide Inserts,” Intl. Conference on the Science of Hard Materials 7, Ixtapa, Mexico, March 5-9, 2001.

167. “Metallographic Study of the Three Mile Island Unit 2 Reactor Lower Head,” Great Plains ASM Chapter, Omaha, NE, March 13, 2001.

168. “Microstructure of Steels,” Kansas City ASM Chapter, March 15, 2001.

169. “Microstructure of Iron- and Aluminum-Based Alloys,” University of Windsor, Windsor, Ontario, Canada, April 2, 2001.

170. “Metallographic Techniques for Duplex Stainless Steels,” Metallography 2001, Stará Lesná, Slovak Republic, April 25-27, 2001.

171.”Identification of Phases in Stainless Steels by Selective Etching,” Metal 2001, Ostrava, Czech Republic, May 15-17, 2001.

172. “Metallographic Procedures for Precious Metals,” Euromat 2001, Rimini, Italy, June 10-14, 2001.

173. “Measurement of Inclusions in Steel by Stereological Methods,” Symposium on Inclusions in Cast Steels, Academy of Mining and Metallurgy, Krakow, Poland, June 22, 2001.

174. “Metallography of Copper and Alloys,” 56th Annual ABM Congress, Belo Horizonte, Brazil, July 16-20, 2001.

175. “Measurement of the Nodularity of Graphite in Ductile Cast Iron,” 8th European Congress for Stereology and Image Analysis, Bordeaux, France, September 4-7, 2001.

176. “Color Metallography,” Günther Petzow 75th Birthday Symposium, DGM Meeting, Neu-Ulm, Germany, September 19-21, 2001.177. “Contempoary Concepts in Specimen Preparation,” DGM Meeting, Neu-Ulm, Germany, September 19-21, 2001.

178. “Metallography and Microstructure of Aluminum and Alloys,” Aluminium 2001, Decín, Czech Republic, October 3-5, 2001 (presented for me by Vladimir Suchánek).

179. “Microstructureof Fe-Based Alloys,” Budapest Polytechnic, October 12, 2001.

180. “Contemporary Specimen Preparation Methods,” 3rd Hungarian Conference and Exhibition on Materials Science, Testing and Informatics, Balatonfüred, Hungary, October 14-17, 2001.

181. “Microstructure of Isothermally Treated Steels,” 3rd Hungarian Conference and Exhibition on Materials Science, Testing and Informatics, Balatonfüred, Hungary, October 14-17, 2001.

181. “Color Metallography,” University of Miskolc, Hungary, October 18, 2001.

178.”Microstructure of Fe-Based Alloys,” IMS Symposium, Indianapolis, Indiana, November 4, 2001.

179. “Color Metallography,” IMS Symposium, Indianapolis, IN, November 4, 2001.

180. “Identification of Phases in Stainless Steels by Etching,” IMS Technical Meeting, Indianapolis, IN, November 5-7, 2001.

181. “Metallographic Study of the Lower Head of TMI Unit 2,” Buffalo ASM Chapter, December 13, 2001.

182. “Color Metallography,” Akron ASM Chapter, Akron, Ohio, January 16, 2002.

183. “Color Metallography,” Twin Tiers ASM Chapter, Ithaca, New York, January 22, 2002.

184. “Color Metallography,” Lehigh University, Bethlehem, Pennsylvania, January 23, 2002

185. “Metallography of Precious Metals,” Lehigh University, Bethlehem, Pennsylvania, January 23, 2002

186. “Color Metallography,” Lehigh Valley ASM Chapter, Moselem Springs, Pennsylvania, January 24, 2002

187. “Color Metallography,” Drexel University, Philadelphia, Pennsylvania, January 25, 2002

188. “Metallography of Fe-Based Alloys,” University of California – Davis, Davis, California, February 11, 2002

189. “Color Metallography,” San Jose University, San Jose, California, February 12, 2002

190. “Microstructure of Fe-Based Alloys,” Golden Gate ASM Chapter, San Francisco, California, February 13, 2002

191 and 192. “Microstructure of Fe-Based Alloys” and “Color Metallography,” Politecnico de Milano, Milan, Italy, February 18, 2002

193. “Metallography of Mg Die Cast Alloys,” High Tech Die Casting Conference, Vicenza, Italy, February 22, 2002

194. “Identification of Phases in Stainless Steels,” Warsaw University of Technology, Warsaw, Poland, March 14, 2002

195. “Color Metallography,” Minnesota ASM Chapter and Minnesota Microscopy Society, St. Paul, Minnesota, March 27, 2002196. “Advances in Metallography,” Ontario ASM Chapter, Toronto, Canada, April 2, 2002

197. “Metallographic Study of the Lower Head of Three Mile Island Unit 2,” Queens University, Kingston, Ontario, Canada, April 3, 2002

198. “Microstructure of Metals,” Ottawa ASM Chapter, Ottawa, Ontario, Canada, April 3, 2002

199. “Metallographic Study of the Lower Head of Three Mile Island Unit 2,” Chalk River Laboratories, Chalk River, Ontario, Canada, April 4, 2002

200. “Specimen Preparation for Electron Microprobe Analysis,” Symposium on Understanding the Accuracy Barrier in Quantitative EPA and the Role of Standards, NIST, Gaithersburg, Maryland, April 10, 2002

201. “Color Metallography,” University of Missouri at Rolla, Rolla, MO, April 24, 2002.

202. “Color Metallography,” Kansas City ASM Chapter, Kansas City, Missouri, April 25, 2002

203. “Metallographic Study of the Lower Head of the Three Mile Island Unit 2 Reactor,” Savannah River Laboratory, Aiken, SC, May 21, 2002.

204. “Color Metallography,” Savannah River ASM Chapter, Aiken, SC, May 21, 2002.

205. “Metallographic Examination of Defects in Steels,” Conference on Metallography in Industry, Libverda, Czech Republic, June 19-21, 2002.

206. “Metallography of Copper and Copper Alloys,” 35th Annual IMS Convention, Quebec City, Canada, August 4, 2002.

207. “Color Metallography,” 35th Annual IMS Convention, Quebec City, Canada, August 4, 2002.

208 and 209. “Color Metallography of Copper and its Alloys,” and “Metallography of Precious Metals including Spangold,” Universita? di Milano-Bicocca, Milan, Italy, September 5, 2002.

210. “Inclusion Rating and ASTM Committee E-4,” ESIS TC 20 Committee, Politecnico de Milano-Bovisa, Milan, Italy, September 6, 2002.

211. “Metallography of Welds,” DGM Tagund, University of Leoben, Leoben, Austria, September 13, 2002.

212. “Microstructure of Iron-Based Alloys in Color,” TU-Wien, Vienna, Austria, September 16, 2002.

213. “Color Metallography,” Silesian University of Technology, Katowice, Poland, October 14, 2002.

214. “Microstructure of Iron-Based Alloys,” Academy of Mining and Metallurgy, Krakow, Poland, October 15, 2002.

215. “Metallographic Specimen Preparation for Image Analysis,” PSS Course on Stereology and Image Analysis, Zakopane, Poland, October 17, 2002.

216. “Revealing Microstructure for Image Segmentation,” PSS Course on Stereology and Image Analysis, Zakopane, Poland, October 19, 2002.

217. “Color Metallography,” South Bay Chapter of ASM, Long Beach, CA, October 24, 2002.

218. “Metallographic Specimen Preparation,” Pontificia Universidade Catolica do Rio de Janeiro, Brasil, November 18, 2002.219. “Metalografia Para o Novo Milenio,” (Metallography for the New Millenium), SENAI, National Services for Industrial Learning, Rio de Janeiro, November 19, 2002.

220. “Metallography for the New Millenium,” Grand Hotel Rayon, Curitiba, Brasil, November 21, 2002.

221. “Metallography of Surface Treatments and Coatings,” Micromat 2002, Sociedada Brasileira de Microscopia e Microanalise, Curitiba, Brasil, November 22, 2002.

222. “Color Metallography,” ASM Miskolc Student Chapter, Miskolc, Hungary, January 15, 2003.

223. “Grain Size Measurement,” ASM Miskolc Student Chapter, Miskolc, Hungary, January 15, 2003.

224. “Microstructure of Iron-Based Alloys,” Bay Zoltan Institute, Budapest, Hungary, January 16, 2003.

225. “Microstructure of Iron Meteorites,” Peoria ASM Chapter, Peoria, Illinois, February 3, 2003.

226. “Metallography of Surface Treatments and Coatings, IFHTSE Symposium “Heat Treatment and Surface Engineering in the Production of Automotive Parts,” Bangkok, Thailand, January 30, 2003.

227. “Conducting the Failure Analysis,” University of Canterbury, Christchurch, New Zealand, March 3, 2003.

228. “Examples of Failed Components,” University of Canterbury, Christchurch, New Zealand, March 5, 2003.

229. “Metallographic Study of the Lower Head of the Three Mile Island Unit 2 Nuclear Reactor,” University of Canterbury, Christchurch, New Zealand, March 13, 2003.

230. “Color Metallography,” Milwaukee, WI, ASMI Chapter, May 13, 2003.

231. “Color Metallography,” Pittsburgh, PA, ASMI Chapter, May 14, 2003.

232. “Microstructure of Titanium Alloys,” CANMET, Ottawa, Ontario, Canada, May 21, 2003.

233. “Microstructure of Magnesium and Its Alloys,” National Research Council, Montreal, Quebec, Canada, May 22, 2003.

234. “Microstructure of Aluminum and Its Alloys,” National Research Council, Montreal, Quebec, Canada, May 22, 2003.

235. “Microstructure of Titanium and Its Alloys,” National Research Council, Montreal, Quebec, Canada, May 22, 2003.

236. “Examination of the Heavily Eroded Structural Steel from Buildings 1, 2 and 7 of the World Trade Center,” 58th Congress of the Brazilian Metallurgy and Materials Society (Associação Brasileira de Metalurgia e Materiais), Rio de Janeiro, July 23, 2003.

237. “Use of Color Metallographic Techniques to Study Welds,” 36th IMS Annual Convention, M&M 2003, San Antonio, TX, August 6, 2003.

238. “Examination of the Heavily Eroded Structural Steel from Buildings 1, 2 and 7 of the World Trade Center,” Albert Sauveur Honorary lecture, Boston ASMI Chapter, Cambridge, MA, 11 September 2003.

239. “Examination of the Heavily Eroded Structural Steel from Buildings 1, 2 and 7 of the World Trade Center,” Metallography Tagung, DGM, Berlin, Germany, September 18, 2003.

240. “Use of Color Etching to Study Historic Artifacts,” Archaeometallurgy in Europe, Milan, Italy, September 26, 2003.241. “Interpretation of Fe-Based Alloy Microstructures,” Queretaro, Mexico, September 30, 2003.

242. “Interpretation of Fe-Based Alloy Microstructures,” Mexico City, October 1, 2003.

243. “Interpretation of Fe-Based Alloy Microstructures,” Monterrey, Mexico, October 3, 2003.

244. “Metallographic Procedures for Cast Iron,” XV Foundry Industrial Conference, Monterrey, Mexico, October 4, 2003.

245. “Metallographic Etching Experiments with Aluminum and Its Alloys,” Aluminium 2003, Decín, Czech Republic, October 8, 2003 (Dr. Margarita Slamova gave my presentation for me).

246. “Examination of the Heavily Eroded Structural Steel from Buildings 1, 2 and 7 of the World Trade Center,” Fast Track talk at ASMI Materials Solutions Conf., Pittsburgh, PA, October 15, 2003.

247. “Metallography of Titanium and Its Alloys,” Polish Society for Stereology Summer School on Stereology and Image Analysis, Zakopane, Poland, October 23, 2003.

248. “Metallography of Thermally Spray Coated Metals,” Polish Society for Stereology Summer School on Stereology and Image Analysis, Zakopane, Poland, October 24, 2003.

249. “Metallography of Titanium,” MDP-8 Conference, Cairo, Egypt, January 5, 2004.

250. “Examination of the Heavily Eroded Structural Steel from Buildings 1, 2 and 7 of the World Trade Center,” Oak Ridge, TN ASMI Chapter, Oak Ridge, TN, January 22, 2004.

251. “Color Metallography,” Rochester, NY, ASMI Chapter, February 10, 2004.

252. “Metallographic Examination of Heavily Eroded Structural Steel from Buildings 1, 2 and 7 of the World Trade Center,” South Central PA ASMI Chapter, Lancaster, PA, February 11, 2004.

253. “Advances in Metallography,” Southern Connecticut ASMI Chapter, Ansonia, CT, February 12, 2004.

254. “Examination of the Heavily Eroded Structural Steel from Buildings 1, 2 and 7 of the World Trade Center,” University of Pretoria, Pretoria, South Africa, 2 March 2004.

255. “Examination of the Heavily Eroded Structural Steel from Buildings 1, 2 and 7 of the World Trade Center,” Failures 2004 conference, Cape Town, South Africa, March 11, 2004.

256. “Introduction to Metallography,” The University of Cape Town, Cape Town, South Africa, 12 March 2004.

257. “Metallography of Welds,” Oregon ASM Chapter, Portland, Oregon, 16 March 2004. (joint meeting with AWS chapter).

258. “Examination of the Heavily Eroded Structural Steel from Buildings 1, 2 and 7 of the World Trade Center,” Zay Jeffries Honorary Lecture, Cleveland ASMI Chapter, April 12, 2004.

259. “Microstructure of Titanium Alloys,” Case-Western Reserve University, Cleveland, April 13, 2004.

260. “Metallography of Welds,” Metallography 2004, 12th International Symposium on Metallography, Stara Lesna, Slovakia, 28-30 April 2004.

261. “Color Metallography,” Inasmet 2004, 3rd International Congress on Materialography and Microstructural Characterization, San Sebastian, Spain, 26 May 2004.262. “Metallography and Microstructure of Aluminum and Alloys,” Inasmet 2004, 3rd International Congress on Materialography and Microstructural Characterization, San Sebastian, Spain, 26 May 2004.

263. “Color Metallography,” 2004 Henry Clifton Sorby Award Lecture, 37th IMS Convention, Microscopy & Microanalysis 2004, Savannah, Georgia, 1 August 2004.

264. “Metallographic Techniques for Superalloys,” 37th IMS Convention, Microscopy & Microanalysis 2004, Savannah, Georgia, August 1-5, 2004 (E. P. Manilova co-author).

265. “A Study of Selective Etching of Carbides in Steel,” 37th IMS Convention, Microscopy & Microanalysis 2004, Savannah, Georgia, August 1-5, 2004 (E. P. Manilova and J. R. Michael co-authors).

266. “Examination of the Heavily Eroded Structural Steel from Buildings 1, 2 and 7 of the World Trade Center,” Peoria, IL, ASMI Chapter, 13 September 2004.

267. “Examination of the Heavily Eroded Structural Steel from Buildings 1, 2 and 7 of the World Trade Center,” Rockford, IL, ASMI Chapter, 21 September 2004.

268. “Study of Selective Etching of Carbides in Steel, 38th DGM Metallographie Tagung, Ruhr-Universität, Bochum, Germany, 1 October 2004.

269. “Understanding Heat Treatment Results Using Metallography,” William Park Woodside Honorary Lecture, Detroit ASMI Chapter, 4 October 2004.

270. “ Examination of Heavily Eroded Structural from Buildings 1, 2 and 7 of the World Trade Center,” 3rd Brazilian MRS Meeting, 9th Micromat Brazilian Symposium on Materials Microscopy, Foz do Iguacu, Brasil, 12 October 2004.

271. “ Metallographic Techniques for Medical Devices,” 3rd Brazilian MRS Meeting, 9th Micromat Brazilian Symposium on Materials Microscopy, Foz do Iguacu, Brasil, 12 October 2004.

272. “A Study of Selective Etching of Carbides in Steel,” 3rd Brazilian MRS Meeting, 9th Micromat Brazilian

Symposium on Materials Microscopy, Foz do Iguacu, Brasil, 13 October 2004.

273. “Metallography of Welds,” International Conference on Joining of Advanced and Specialty Materials, VII, 2004 ASMI Materials Solutions Conference, Columbus, Ohio, 19 October 2004.

274. “Study of the Thermal Exposure of the Lower Head of the TMI2 Nuclear Reactor,” ASMI Materials Solutions Conference, Columbus, OH, 19 October 2004.

275. “Metallographic Characterization of the Microstructure of Tool Steels,” 14th Congress of the International Federation for Heat Treatment and Surface Engineering, Shanghai, China, 26-28 October 2004.

278. “Metallographic Examination of Heavily Eroded Structural Steel from World Trade Center Buildings 1, 2 and 7,” ASM Chicago Regional Chapter, Rolling Meadows, IL, December 14, 2004.

279. “Microindendation Hardness Testing,” McMaster University, Hamilton, Ontario, Canada, January 4, 2005.

280. “Metallographic Examination of Heavily Eroded Structural Steel from World Trade Center Buildings 1, 2 and 7,” ASM Ontario Chapter, Oakville, Ontario, Canada, January 4, 2005.

281. “Introduction to Metallography” and “New Innovations in Metallography,” McMaster University, Hamilton, Ontario, Canada, January 5, 2005.

282. “Color Metallography,” University of Washington, Department of Materials Science & Engineering, Seattle, Washington, January 10, 2005.283. “Materials Issues – World Trade Center,” ASM Puget Sound Chapter, Seattle, Washington, January 11, 2005.

284. “Careers in Materials Science and Engineering,” University of Washington, Department of Materials Science & Engineering, Seattle, Washington, January 12, 2005.

285. “Color Metallography,” ASM Philadelphia Liberty Bell Chapter, National Officers Night, Horsham, PA, January 20, 2005.

286. “Metallographic Examination of Heavily Eroded Structural Steel from World Trade Center Buildings 1, 2 and 7,” Illinois Institute of Technology, Chicago, Illinois, February 20, 2005.

287. “Metallographic Interpretation of the World Trade Center Collapse,” ASM Milwaukee Chapter, Milwaukee, Wisconsin, March 7, 2005.

288. “Metallographic Examination of Heavily Eroded Structural Steel from World Trade Center Buildings 1, 2 and 7,” MSE Department, University of Utah, March 9, 2005.

289. “Metallography of Surface Treatments, Coatings and Platings,” MSE Department, University of Utah, March 10, 2005.

290. “Metallographic Examination of Heavily Eroded Structural Steel from World Trade Center Buildings 1, 2 and 7,” Salt Lake City ASM Chapter, Salt Lake City, Utah, March 10, 2005.

291. “Understanding Heat Treatment Results Using Metallography,” ASM Minnesota Chapter, Shoreview, Minnesota, April 20, 2005.

292. “Metallographic Examination of Sintered Carbides,” 10th Congress on Metallography, Liberec, Czech Republic, June 14, 2005.

293. “ Interlaboratory Program to Characterize Second-Phase Precipitates,” 38th IMS Convention, Honolulu, Hawaii, August 2, 2005.

294. “Metallography of Powder Metallurgy Components,” 38th IMS Convention, Honolulu, Hawaii, 4 August, 2005.

295. “Color Metallography” and “Archaeometallurgy”, Korea Universwity of Technology ande Education, Chungnam, Korea, 29 August 2005

296. “Metallography of Fe-Based Slloys, POSCO, Busan, Korea, 30 August 2005.

297. “Failure Analysis”, Hanyang Institute of Technology, Seoul, Korea, 31 August 2005.

298. “Using Metallography to Understand Heat Treatment Results,” Anshan Steel, Shenyang, China, 2 September 2005.

299. “Introduction to Quantityative Metallography, Stereology and Image Analysis,” Anshan Steel, Shenyang, China, 2 September 2005.

300. “Introduction to Quantityative Metallography, Stereology and Image Analysis,” Wuhan Steel, Wuhan, China, 5 September 2005.

301. “Microindentation Hardness Testing,” Wuhan Steel, Wuhan, China, 5 September 2005.

302. “Metallography of Thermal and Plasma Spray Coatings,” Xi?an, China, 7 September 2005.

303. “Microindentation Hardness Testing, Xi?an, China, 7 September 2005.304. “Metallography of Aluminium and Its Alloys,” Xi?an, China, 7 September 2005.

305. Metallography of Titanium and its Alloys, Xi?an, China, 7 September 2005.

306. Metallographic Procedures for Ceramics, Carbides, Nitrides, and Hard Metals,” Metallographie-Tagung mit Ausstellung, DGM, Erlangen, Germany, 15 September 2005.

307. “Microstructure of Historic Fe-Based Objects, Fast Track Talk, ASMI Annual Meeting, Pittsburgh, Pennsylvania, 27 September 2005.

308. “Color Etching Techniques for Aluminium and Its Alloys,” Aluminium 2005, Decín, Czech Republic, 12 October 2005 (keynote address), E.P. Manilova co-author.

309. “Measurement of Second-Phase Particles,” NMD-ATM 2005, 59th Annual Meeting Indian Institute of Metals, Chennai, India, November 14, 2005

310. “Metallographic Examination of Medical Implants,” NMD-ATM, 59th Annual Meeting Indian Institute of Metals, Chennai, India, November 15, 2005

311. “Microstructural Examination of Historical Fe-Based Objects,” Orlando ASM Chapter, Orlando, FL, 25 January 2006.

312. “Metallography of Advanced Materials,” Los Angeles ASMI Chapter, 21 March 2006.

313. Specimen Preparation for EBSD,” INASMET 2006, San Sebastian, Spain, 24 May, 2006

314. “Metallographic Preparation for Electron Backscattered Diffraction, 39th IMS Meeting, Microscopy & Microanalysis 2006,” Chicago, IL, July 31, 2006.

315. “Metallography and Microstructure of Metals Used in Medical Devices,” 39th IMS Meeting, Microscopy & Microanalysis 2006,” Chicago, IL, August 1, 2006.

316. “Specimen Preparation for Electron Backscattered Analysis,” 12th International Metallographic Congress, Leoben, Austria, 25 September, 2006.

317. Microstructure of Historic Fe-Based Objects,” Rockford, IL ASM Chapter, 16 January 2007.

318. “Specimen Preparation for EBSD,” 14th International Metallographic Conference, Stara Lesna, Slovakia, 2 May 2007

319. “Microstructure of Historic Bronze Objects,” 40th IMS Meeting/ Microscopy & Microanalysis 2007, August 8, 2007, Ft. Lauderdale, FL

320. “Microstructural Exaamination of Medical Devices,” DGM Tagung, Bremen, Germany, 19-21 September 2007.

321. “Specimen Preparation for EBSD,” 60th Annual Meeting Indian Institute of Metals, Mumbai, November 12-15, 2007.

322. “Microstructure of Low-Melting Point Metals and Alloys,” 60th Annual Meeeting of the Indian Institute of Metals, Mumbai, India, November 12-15, 2007.

323. “Fractography and Failure Analysis,” Integrity Assessment and Failure Analysis of Linepipe Steels, IIT Bombay, November 17, 2007.324. “Fractography and Failure Analysis,” Seminar at Motor Industries Co. Ltd, Nashik, India, Sunday, November 18, 2007.

325. “Advances in Metallography,” Indian Institute of Metals, Hyderabad Chapter, November 20, 2007.

326. “Color Metallography,” POSCO, Pohang Iron and Steel Co., Korea, March 11, 2008

327. “Specimen Preparation for EBSD,” POSCO, Pohand Iron and Steel Co., Korea, March 11, 2008

328. “Color Metallography,” Research Institute of Industrial Science & Technology, Kyungbuk, Korea, March 12, 2008

329. “Specimen Preparation for EBSD,” Research Institute of Industrial Science & Technology, Kyungbuk, Korea, March 12, 2008

330. “Color Metallography,” Sankei Co., Ltd, Tokyo, Japan, March 14, 2008

331. “Specimen Preparation for EBSD,” Sankei Co., Ltd, Tokyo, Japan, March 14, 2008

332. “Color Metallography of Welds,” San Francisco AWS Chapter, May 7, 2008.

333. “Microstructure of Wire Rope,” Metal 2008, Hradec nad Moravicí, Czech Republic, May 13, 2008.

334. “Microstructure of Al-Si Alloys,” Metal 2008, Hradec nad Moravicí, Czech Republic, May 14, 2008.

335. “Metallographic Preparation for Electron Backscatter Diffraction,” 35th Annual Meeting, Microscopical Society of Canada, May 22, 2008.

336. “Specimen Preparation for EBSD,” Inasmet 2008, San Sebastian, Spain, May 29, 2008.

337. “Grain Delineation and Measurment by EBSD,” IMS/Microscopy & Microanalysis 2008, Albuquerque, New Mexico, August 3, 2008.

338. “Grain Delineation and Measurement by EBSD,” SterMat, Zakopane Poland, September 2-6, 2008.

339. “Microstructure of Pb-Sn and Pb-Free Solders,” DGM meeting, Jena, Germany, September 18, 2008.

340. “EBSD and Nanoindentation to Examine Heat Treated Microstructures,” 17th IFHTSE Conference, Kobe, Japan, October 29, 2008.

341. “Delineation and Measurement of Grain Size by EBSD,” Indian Institute of Metals, ATM-NMD, November 15, 2008, Nodia, India

342. “Microstructure of Pb-Sn and Pb-Free Solders,” Indian Institute of Metals, ATM-NMD, November 15, 2008, Nodia, India

343. “Metallography and Failure Analysis,” ASM South Central PA chapter, Lancaster, PA, January 14, 2008.

344. “Influence of Theral Exposure on the Lower Head of the Three Mile Island Unit 2 Nuclear Reactor, April 29, 2009, The Ohio Aerospace Institute, Cleveland ASMI Chapter, Cleveland.

345. “Microstructure of Historical Bronze Objects,” ASM Milwaukee Chapter, Milwaukee, May 12, 2009.

346. “Isothermal Transformations in Steels,” IFHTSE Conference, Dubrovnik-Cavtat, Croatia, June 11, 2009.

347. “Metallographic Sectioning and Grinding Damage Analysis Through the Use of Color Metallography and Electron Backscattered Diffraction (EBSD),” Microscopy & Microanalysis 2009, Richmond, VA, July 27, 2009

348. “The Al – Si Phase Diagram, Microscopy & Microanalysis 2009, Richmond, VA, July 28, 2009

349. Quantitative Evaluation of Metallographic Preparation Quality Using EBSD,” Microscopy & Microanalysis 2009, Richmond, VA, July 27, 2009

350. “Metallographic Examination of Bronze Bracelets from Hasanlu,” Microscopy & Microanalysis 2009, Richmond, VA, July 30, 2009

351. “Microstructure of Ti and Its Alloys,” 42nd Metallography Tagung of DGM, Aachen, Germany, September 16, 2009.

352. “Improving SEM Images of Microstructures,” Annual Meeting of the Brazilian Microscopy Society, Belo Horizonte, Brazil, Oct. 5, 2009

353. “The SEM as a Metallographic Tool,” Annual Meeting of the Brazilian Microscopy Society, Belo Horizonte, Brazil, Oct 6, 2009

354. “Metallographic Examination of Heavily Eroded Structural Steel from World Trade Center Buildings 1, 2 and 7,” Instituto Nacional de Technologia Agroprcuaria, Castelar, Argentina, October 23, 2009

355. “Improving SEM Images of Microstructures,” 10th Interamerican Congress on Electron Microscopy, Rosario, Argentina, October 27, 2009

356. “The SEM as a Metallographic Tool,” Midwest Microscopy and Microanalysis Society, November 20, 2009, Deerfield, IL

357. “Characterization of Surface Treated, Coated and Plated Steels,”IFHTSE Conference, Sharm El-Sheik, Egypt, December 2, 2009.

358. “Microstructure of Historical Fe-Based Objects,” Milwaukee ASM Chapter, May 11, 2010.

359. “Metallographic Specimen Preparation for EBSD,” EBSD 2010 Symposium, MAS, University of Wisconsin, Madison, Wisconsin, May 24, 2010.

360. “Revealing Prior-Austenite Grain Boundaries,” Paper 250, Microscopy & Microanalysis 2010, Portland, Oregon, August 3, 2010, conference CD. Paper 250, Microscopy & Microanalysis 2010, Portland, Oregon, August 3, 2010.

361.  "Influence of Specimen Preparation on SEM Images and Comparison to LOM Images, Paper 540, Microscopy & Microanalysis 2010, Portland, Oregon, August 4, 2010.

362. “The Indentation Size Effect,” EMCO Test, Kuchl, Austria, March 21, 2011 (with Ryan Fowler).

363. “Tool and Die Failures,” 3rd International Conference on Heat Treatment and Surface Engineering of Tool Steels and European Conference on Heat Treatent 2011: Quality in Heat Treatment, Wels, Austria, March 23, 2011.

364. “Examination of the Load-Hardness Problem in Microhardness Testing,” 3rd International Conference on Heat Treatment and Surface Engineering of Tool Steels and European Conference on Heat Treatent 2011: Quality in Heat Treatment, Wels, Austria, March 24, 2011.

365. “Obtaining Consistent Vickers Hardness at Loads 100 Grams Force,” Microscopy & Microanalysis 2011, Nashville, August 9, 2011.

366. “Methanol Pipeline Failure in the Canyon Express System,” Microscopy & Microanalysis 2011, Nashville, August 10, 2011.

367. “Specimen Preparation of Metals and Alloys for EBSD,” Microscopy & Microanalysis 2011, Nashville, August 11, 2011.

368. “ASTM E 1245 for Measuring Inclusions and Other Discrete Phases,” AGMA Meeting, Chicago, IL, September 27, 2011.

369. “How to Conduct the Failure Analysis,” Linepipe Committee of AIST, Niagara Falls, Canada, September 29, 2011.

370. “Correlation Between Vickers Hardness and Yield Strength for Linepipe Steels,” Linepipe Committee of AIST, Niagara Falls, Canada, September 29, 2011.

371. “Microstructure of Linepipe Steels,” Linepipe Committee of AIST, Niagara Falls, Canada, September 29, 2011.  

372. “Microstructure of Cast and Wrought Aluminum,” Missouri University of Science & Technology, Rolla, MO, October 27, 2011.

373. “Microstructure of Titanium and Its Alloys,” Missouri University of Science & Technology, Rolla, MO, October 28, 2011.

374. “Microstructure of Nitrided Steels,” European Conference, Combined Treatments to Improve Surface Properties, Palaisdes Congrès de Strasbourg, France, 22 March 2012 (with Ryan Fowler).

375. “Three Mile Island Nuchear Reactor Failure – My Study of How Hot the Lower Head Got,” 2nd Argentine Congress on Microscopy, Plenary Lecture, Buenos Aires, Argentina, 18 April 2012.

376. “Measurement of Grain Size in Twinned FCC Alloys,” Stermat 2012, Zakopane, Poland, 4 September 2012.

377. “Selective Etching for Image Analysis, “ Young Stereologist’s School, Stermat 2012, Zakopane, Poland, 5 September 2012.

378. “Color in Metallography – Estectic, Artistic and Useful!,” Banquet Speech at 6th International Quenching and Control of Distortion Conference, the HTS of ASM International, 12 September 2012, Chicago, IL.

379. “Microstructural Characterization: Past, Present and Future,” Alpha Sigma Mu Honorary Lecture, MS&T Meeting, Pittsburgh, October 8, 2012.

380. “Determination of the Degree of Thermal Exposure to the Lower Head of the Three-Mile Island Unit 2 Nuclear Reactor Using Metallography,” Keynote Address, Ferrous 2012, Mount Grace Country House & Spa, Magaliesburg, South Africa, South African Institure of Mining and Metallurgy, October 17, 2012.

381. “Metallurgical Insights from the Collapse of the World Trade Center Buildings,” Hartford, Connecticut ASM Chapter, November 8, 2012.

382. “Examination of Grain Counting Methods – Planimetric and Intercept – With Circles and Rectangles,” Fall ASTM E-4 Meeting, Atlanta, November 13, 2012

383. “Image Analysis Measurements of Graphite in a Number of DI Specimens Using E2567 and Modifications,” Fall ASTM E-4 Meeting, Atlanta, November 13, 2012.

384. “Utilizing ASTM E 1245 for Measuring Discrete Second Phases,” ASTM E-4 Workshop on Nonmetallic Inclusion Rating, Atlanta, November 14, 2012

385.”Influence of Specimen Preparation on LOM and SEM Imaging of Microstructures,” Georgeia Institute of Technology, Materials Science Seminar, Atlanta, November 15, 2012

386. “Historical Fe-Based Objects,” Metro NY-NJ ASM Chapter, Mountainside, NJ, November 27, 2012.

387. “The Lampshade: A Study of Provenance,” Chicago ASM Chapter, Aurora, IL, December 11, 2012.

388. “Metallography of Surface Treatments, Coatings, and Platings,” Milwaukee Branch of the National Association for Surface Finishers, Milwaukee, March 12, 2013.

389. “Determining the Nodularity of Graphite in Ductile Iron Using ASTM E2567,” IMS/ASMI Quantitative Metallography Conference & Exposition, San Antonio, Texas, April 4, 2013.

390. “A Comparison of Grain Size Measurement Methods,” IMS/ASMI Quantitative Metallography Conference & Exposition, San Antonio, Texas, April 5, 2013.

391.Keynote Lecture: “Metallographic Characterization of Carburized Steels,” IFHTSE and ASMI Heat Treating and Surface Engineering Expo, Chennai Trade Centre, Chennai, India, 16 May 2013.

392. “Measuring the Sphericity of Graphite in Ductile Iron According to the New ASTM Standard, E 2567,” Norsk Metallografisk Forening (Norwegian Microscopy Society) 2013 Meeting, Sunndalsøra, Norway, 19 June 2013.

393. “Measuring Grain Size Using Several Different Methods,” Norsk Metallografisk Forening  (Norwegian Microscopy Society) 2013 Meeting, Sunndalsøra, Norway, 19 June 2013.

394.Pleanary Lecture: “Determination of the Degree of Thermal Exposure to the Lower Head of the Three-Mile Island Unit 2 Nuclear Reactor Using Metallography,” Advanced Metal, Materials and technologies, 10th International Scientific and Technical Conference, St. Petersburg, Russia, 25 June 2013.

395. “Measuring the Sphericity of Graphite in Ductile Iron According to the New ASTM Standard, E 2567,” DGM meeting, Friedrichshafen, Germany, September 20, 2013.

396. “Etching to Reveal Microstructure,” Sandvik Steel, Sandviken, Sweden, November 19, 2013.

397. “Microindentation Hardness Testing,” Sandvik Steel, Sandviken, Sweden, November 19, 2013.

398. “Welding and Weld Microstructures,” Höganäs Sweden, Ballerup, Denmark, November 20, 2013.

399. “Color Metallography – Artistic, Esthetic and Extremely Useful!,” Chicago ASM Chapter, Rolling Meadows, IL, January 14, 2014.

Log in to your account or